WifiInfoView is a great Wi-Fi utility for Windows

WifiInfoView is a Great WiFi Analyzer Windows Vista/7/8/10


TrendingCips.com – Best wifi analyzer app. The other day, I used to be at a cafe wherever the Wi-Fi appeared slow. I did not run actual speed tests, as that will have simply side to the network load. Instead, I fired up the excellent WifiInfoView program from Nir Sofer.

Windows, like many operating systems, provides a pathetic quantity of Wi-Fi information. while not enough technical data, we are left to guess at the foundation explanation for slow Wi-Fi. WifiInfoView is that the motherload of tekki data about your Wi-Fi setting. I ran the program simply to check on the signal strength, however, I learned much more.

So…What is wifi analyzer windows? this is wifi signal strength app?

Here is the post wifi analyzer PC:

The cafe had 2 Wi-Fi networks, one on every frequency band (2.4GHz and 5GHz). I had connected to the 5GHz band. If you’re close enough to a router to urge a strong signal, the 5GHz band ought to be quicker. If the 5GHz signal strength is weak, the 2.4GHz band ought to supply a stronger signal, because the lower frequency permits it to raised pass through obstructions.

Two cafe networks, one on every waveband, as displayed by WifiInfoView
Above may be a little excerpt from the WifiInfoView report showing the 2 networks (each had a distinct SSID) belonging to the cafe.

The last column, most Speed, illustrates the purpose regarding speeds. For the 2.4GHz network, it’s 216Mbps. For the 5GHz network, it is 1,300Mbps. The PHY sort column shows that the 5GHz network supports Wi-FI N and at which the two. The 4ghz network supports Wi-Fi N and G. The WPS pillar shows that whoever configured the router did not bother to disable WPS. they ought to have. All told, no surprises here.

Helpful WifiInfoView data

Wifi scanner windows, What was a surprise was the Stations Count, that is that the number of devices (a.k.a. stations) connected to a given network/SSID. there have been fifty-seven devices victimization the 5GHz network, and none of the two.4GHz network.

Next to the current is that the Channel Utilization, the routers opinion of however busy its Wi-Fi channel is. Considering how many individuals were victimization the 5GHz network, it’s no surprise that it shows as 83.1% busy. That the 2.4GHz network shows as thirty eight.4 % busy with none connected devices is mentioned later.

The Station Count and Channel Utilization fields area unit new additions to WifiInfoView. the present version is a pair of.27; they were a side in version 2.25. Sadly, not all routers and access points report this info. The program documentation says that’s solely on the market from devices that report “BSS Load” info.

My Pepwave Surf SOHO doesn’t give this data. Neither do Apple routers, Google WiFi or the Linksys WRT120N, E2500 and E1200. Among the businesses that do supply it are a ruckus, , Asus, Ubee, and Securifi. Some devices from Arris, Belkin, and Netgear don’t give this data; others do.

A sample of the large quantity of Wi-Fi connected data provided by WifiInfoView
These fields are simply the tip of the data iceberg offered by WifiInfoView. The screenshot higher than illustrates this, however even that screenshot shows solely 0.5 the available data.

The fields that the majority interest me are the SSID, Average Signal Quality, the Channel being employed by the SSID, the Channel dimension and therefore the range of impacted Channels, the corporate that created the router/access purpose, the router name and and model, Security (WPA2-PSK normally), Cipher and WPS Support.

A cipher worth of CCMP is that the most secure; it’s generally said as AES elsewhere. The program conjointly reports the BSS sort, however, my expertise has been that it’s just about perpetually Infrastructure. I actually have nevertheless to meet an Ad-Hoc Wi-Fi network.

I commonly kind the show by Average Signal Quality to envision the networks close with the strongest signals. As a rule, your Wi-Fi network ought to use completely different channels, on every waveband, than your neighbors.

Sorting by channel variety is additionally valuable. For one thing, it points out those who do it wrong on the 2.4GHz band.

Wi-Fi was designed to let multiple networks with courtesy share an equivalent channel. Thus, things work far better if 3 networks are all on channel half-dozen as against one being on channel five, another on channel half-dozen and another on channel seven. within the latter case, all networks suffer from radio interference and nobody benefits.

There are solely 3 channels within the older a pair of. The 4ghz band that doesn’t overlap/ interferes with every other: one, 6 and 11. The vast majority of routers and access points limit themselves to those 3 channels.

Among the routers that I actually have seen victimization rogue channels: Netgear victimization channel three, Asus and Apple on channel four, Arris and Routerboard.com on channel five, and method on channel ten. What we won’t tell is whether or not these poor decisions were created by the code within the routers or the device owners.

Sorting by channel conjointly provides insight into the Channel Utilization.

According to Nir Sofer, the program’s author, this “specifies the % of your time that the channel is busy.” Note that it’s not the % of your time that anybody explicit router is utilizing the wireless channel.

In a terribly huddled Wi-Fi area, I sorted WifiInfoView by channel and located regarding 0.5 the routers reported a Channel Utilization for channel one on the 2.4GHz band. Their percentages were: 27, 31, 58, 43, 20, 22, 32, 45, 54, 11, 71, 63. the simplest estimate for the particular utilization of this channel is perhaps provided by the common of-of these numbers.

In a huddled Wi-Fi neighborhood, wherever each a pair of.4GHz channel is employed by multiple networks, your best performance can come back from avoiding the busiest channels.

So, addressing an earlier topic, why will a network with no devices report that its channel is 38.4 % busy? each Wi-Fi network must sporadically broadcast its accessibility alternatively nobody would notice it. My best guess is that the router detects traffic from close networks once it goes to broadcast these announcements.

In the end, it clothed that the explanation everybody within the cafe was on the 5GHz network was straightforward. The networks had completely different passwords, and therefore the one i used to be given worked solely on the 5GHz network.

Running WifiInfoView

WifiInfoView is free and portable. you merely download and install a rar application file and run the enclosed WifiInfoView.exe feasible. The program works on Windows Vista, 7, 8, ten and Server 2008. each 32-bit and x64 systems are supported. Mr. Sofer’s website, nirsoft.net, has a giant assortment of wonderful, free, portable utilities for Windows. extremely suggested.

Related Article for you:

The post best wifi analyzer app Windows on category Internet.

Thank you for reading the post wireless channel scanner.

You can write your opinion about wifi signal strength app with Wifiinfoview in the comment box, and don’t forget to share this post along with your friend.

Gravatar Image
I am the owner of this site.

Leave a Reply

Your email address will not be published. Required fields are marked *